Tubeless rim tape

We Have worked closely with our to produce a tape that's easy to install and remove, offering tubeless tape that is high quality and reliable. 

We worked on the film first, then the adhesive to produce a tape that will work with both Carbon and alloy rims. The adhesive we developed adheres well to a clean rim bed, even when the rims are cold. Previously we had to warm the tapes to get the best adhesion to the rim.

This tape has been designed to run two layers for high-pressure 70 plus or 1 layer for lower pressures 70 psi or less. Through our testing and experience we have found this to be the best tubeless solution. 

Selecting the correct width of the tape to suit your rim profile is really important. The tape should be a few mm wider than your rims internal width. This allows the tape to get the best seal at the rim edge and the tyre will seal a lot better this way.

Guide for Pacenti rims

Internal 19mm rim use 21mm tape

Internal 20/21mm rim use 25mm tape

Internal 24mm rim use 27mm tape

Internal 25mm rim use 27mm tape

Internal 30mm rim use 33mm tape 

• Seals most rims airtight
• Works with or without tubes
• One roll will cover two layers on two wheels  1 roll per pair.
• Available widths 21mm, 25mm, 27mm, 30mm, 33mm, and 38mm